Fire Fighting Equipments: Your Expeditious Defenders In The Event Of Fire

Fire protection, regardless of how good the equipment may be, is entirely nullified if equipment is not kept in operative condition at all times. Therefore, proper care of firefighting equipment and routine inspection has to be done to make sure the equipment is kept in perfect working order for instant use. If it is installed in office buildings, foremen and other employees should be instructed beforehand prior to the installation with the use of all fire equipment so that in they will not only be able to bring it quickly into action in the event of fire, but also so that they will realize the importance of its being accessible and unobstructed at all times.

When foremen and employees are duly instructed, you might not have to worry at your back, as in case of the dangers of poor housekeeping and defective electrical equipment they will immediately get them repaired. Let’s check out how to take care of these equipment of fire fighting, which may help you in explaining your staff and family members. But, before that you may take a look on different types of hand-held fire extinguishers and understand what their parts are called as: 

Understanding the Periodic Care and Inspection That Should Be Taken For Different Firefighting Equipments:

• Dry Chemical Extinguishers: These extinguishers contain a cartridge of carbon dioxide or nitrogen which is used to expel the dry compound. The carbon dioxide or nitrogen cartridge should be removed and weighed every 6 months. And in case if it shows loss of weight then they should be replaced without any delay.
• Antifreeze Pump Tank Extinguishers:  This type of extinguisher should be examined at least once yearly so as to check the condition of operating parts, and during this examination, a drop of oil should be put on the piston rod packing.
• Carbon Dioxide Extinguishers: Carbon dioxide extinguishers should be weighed at least once every 6 months to detect leakage or accidental release and must be recharged immediately after use, even though only partially discharged.
• Handling Hose At Fires: Hose lines should not be dragged unnecessarily over pavements. Hose rollers should be used in hoisting hose onto roofs and into windows. Also, they should not be dropped or dragged as this may result in mashed threads, jammed swivels, and other damage. After the use, all the dirt in the hose should be thoroughly brushed off. If the dirt cannot be removed by brushing, they should be washed with plain water and scrubbed carefully.
• Hose Couplings: After the use couplings, the threads should be examined properly and any injured or defective couplings should be repaired immediately. Make sure you do not use oil or grease on any hose coupling as it is likely to result in damage to the hose. If dirty, they should be spun in a pail of soapy water.

Apart from taking these protective measures and precautions you should also ensure that you buy only branded firefighting equipments like that of LIFEGUARD, NEWAGE, Getech, SAFEGUARD, and Agflex. There are many industrial megastore offering these top brands of fire fighting. But you should always buy them online, as there are greater chances of getting huge discounts from them. You may visit GaramLoha an online industrial megastore which offers you wide range of branded fire fighting equipments in the most minimum prices than anywhere, check them right away!